Ideal for compacting small sand molds in a foundry or casting facility. Its shorter height and light weight allow this unit to be used on smaller molds that are set up waist high. Its unique double-action "sand wiper" seal excludes dirt and grit from inside the tool for reduced wear and long life.
- Time tested valve design
- Round piston rod
- Built in muffler
- 2-1/2" (64mm) butt included
- Optional front end butts available
Interested in this item or want more information?
Hours:
Phone: 800-877-3030
Email: rvoelp@tri-state-industrial.com
Can't find what you want? Give us a call and we can help you find it.
Details
| Model | 130A1M |
|---|
| Blows per Minute | 870 |
| Piston Stroke in. (mm) | 2.5" (63) |
| Weight w/o Accessory lb (kg) | 11.56 (5.24) |
| Length w/o Accessory in. (mm) | 21.5" (546) |
| Bore in. (mm) | 1" (25) |
| Butt Diameter in. (mm) | 2.5" (64) |
| Air Inlet in. (NPT) | 1/4" |
| Minimum Hose Size in (mm) | 3/8" (10) |
| Air Consumption @ Load cfm (L/min) | 14 (396) |
Additional Information
Manufacturer: Ingersoll Rand